Midwest Tank
  home Home home About Us home Services home Contact Us home Site Map
tank fabricators Inflammable Waste Traps

tank fabricators Sand Traps, Catch Basins & Steel Sump Basins

tank fabricators Pressure Vessels

tank fabricators Condensate Tanks

tank fabricators Cooling Tower Sump Tanks

tank fabricators Sulfuric Acid Tanks

tank fabricators Stainless Steel Tanks

tank fabricators Tank Linings

tank fabricators CAD Services

tank fabricators Custom Tanks

Search Catalog
 All Categories    Hydropneumatic Tanks
All Categories > Pressure Vessels > Hydropneumatic Tanks > Item # HP6660  

Item # HP6660, Hydropneumatic Tanks

Midwest Tank Co. standard tappings for pressure tanks used in hydropneumatic service. The standard interior lining for hydropneumatic tanks is a TNEMEC Series 20-2000 Pota-Pox with a 7 to 11 mil DFT. This is an NSF approved coating and is used throughout the industry for protection in cold water applications. This coating requires an SSPC-SP 10 near-white blast. All tank exteriors shall be primed. Alternate linings are available. All tanks are ASME labeled and are available in 100, 125, and 150 PSI design pressures.

Other sizes are available upon request. The diameter must be in 6-inch increments. The length of the shell may be manufactured to whatever length is necessary to achieve the desired capacity. Number of openings and sizes may be located on the drawing worksheet. There is no limit on quantity or size of openings. A standard manhole is 12 inches by 16 inches. Other manhole sizes are available



1134 gal


66 in

Overall Height

88 in

Design Pressure

100 psi

    Download PDF Download PDF   
    Email Email This Page  
    Save To Favorites Save To Favorites


·  Vertical Hydropneumatic Tanks

·  Dimensional Drawing